You can use a universal remote to operate many devices, from TVs and VCRs to cable boxes, home theater receivers, and Blu-ray/DVD players. Programming can take quite some time in many circumstances, but here are some efficient ways to do it. Method 1: Universal Remote Instructions Manual Whenever you push a button on your remote, it activates a signal from the remote’s circuit board to the other device. Basically, it sends a command code that tells your TV what to do. This is usually an infrared signal, so you need to be within thirty meters of the other device and within the line of sight. No matter what remote you have, if you cannot find a solution, consider the options discussed below. What is the Proper Way to Set Up a Universal Remote Control? Common method #3: Hold the device key down until the LED blinks several times. Then release the key and enter the first code. To better understand the programming process, it’s important to understand exactly how your universal remote communicates with the device it’s programming.

rm series Replacement Remote Control for Humax FOXSAT-HDR rm series Replacement Remote Control for Humax FOXSAT-HDR

Common method #4: Press and hold the power button and device key simultaneously until the LED blinks or remains lit, then release and repeatedly press the power button until the device turns on or off, then press the device key (sometimes the stop button) to save the setting. Also reported to work with RM-Y135, RM-Y154, RM-Y167, RM-Y168, RM-Y169, RM-Y170, RM-Y171, RM-Y181, RM-Y186, RM-Y902, RM-Y906, RM-Y144, RM-Y180. The instructions for entering device codes are mentioned above, but here are the most common ways to program a remote.

Aside from entering codes, the instructions will provide help with programming your universal remote without them. This scenario covers anything not listed in the manual. It also comes in handy if the listed codes do not work for the intended device, which does occasionally happen since the codes are based on brand, not model.

RM-Series Replacement Remote Control for Bush DVB-T2-PVR-MPEG4 RM-Series Replacement Remote Control for Bush DVB-T2-PVR-MPEG4

Any advice on either the above or how to get my RM series remote to work, or suggest alternatives? Obviously now I have the web interface working I can use this but I would obviously just like a functioning remote! Thanks in advance!Second, make sure you can establish a direct link between your universal remote control and the device you wish to program. Closer is better. If something gets in the way (your cat, child, or even an object) and the process is interrupted, you will probably have to start over from the beginning. How Remotes Work As opposed to standard remote controls, Universal remotes have a broader compatibility range, so they can be used with several devices. To program one of these remotes, you’ll need to push a sequence of buttons to sync the remote and your TV (or another device).