For example, your phone and headphones, your media player and speaker, or your iPad and keyboard all use Bluetooth to wirelessly transfer data between two devices. The Bluetooth Special Interest Group claims that it is one of the most widely used wireless technologies worldwide. Bluetooth devices are anticipated to ship in excess of 4.6 billion units this year alone, and by 2024, that figure is anticipated to reach more than 6 billion units annually.

But the constant flashing can be annoying, especially if you’re in a dark room and the headphones are causing too much attention to themselves. Replacing your headphone pads aren’t as complicated as you think they are. In fact, the entire process is quite simple and can be done easily in minutes. One way to find out if your headphones are disconnected from each other is if the sound comes through only one channel. It’s possible you may have accidentally held down the pairing button. This puts the headphones in pairing mode, which makes the status lights blink red and blue. Now that we’ve got the flashing red and blue lights out of the way, what about other status light colors? If your headphones flash blue, red, amber, orange, or red, here’s what it usually means. Why are my wireless headphones blinking blue?The blue light will flash for about 4 times then your headset is factory reset and all pairing information is deleted. Headphones come in different shapes and sizes, which is why it’s a must that you replace your headphone cushions with perfectly fitting earpads. Bluetooth usually works within a range of 10 meters or less. Make sure the devices you want to pair are within close range of each other. The closer the better. 3. Read the manual that comes with your headphones. Bluetooth headphones eliminate all the inconveniences of tangly wired headphones, but they can be frustrating to use at times. Removing moisture also prevents the development of any odors, so you won’t have to worry about your headphones smelling bad. Keep your ears clean Cleaning the ears

A slow pulsing blue light can mean the headphones are in pairing mode. The most common light pattern for pairing mode is blinking red and blue. However, you may still want to try pairing your headphones with another device to see if the pulsing blue light stops once it is connected. There are no wires needed to connect your devices to Bluetooth headphones. Therefore, it makes sense if you’re having trouble pairing your Bluetooth headphones with your computer or smartphone. However, connecting your headphones to any device is simple. Here’s how to pair a Bluetooth headphone with a Mac, Windows computer, iPhone, or Android smartphone. Start prying away at a small section of the headphone pad then work your way around the entire pad until it eventually comes off. There are multiple reasons you might want to unpair your headphones from your phone or other connected device. Maybe you're having some issues connecting and the headphones don't seem to be cooperating—it happens, and like so many tech-related issues, the answer is often to reboot and try again. Except in this case, you may wish to not only reboot your headphones, but to also erase them from your Bluetooth device list and start the pairing process anew.Most Bluetooth devices use the two most common pairing mechanisms, legacy pairing and a newer mechanism called Simple Secure Pairing (SSP). Legacy Pairing Once you’ve got a portion of the hairband securely in place within the lip, continue with the rest of the headphone pad by sliding the rest of the elastic into the groove using your fingers. Besides keeping your headphone pads or headset clean, it’s also important that you practice proper hygiene and make sure that you clean your ears regularly. By keeping your ears clean, you won’t be introducing ear wax or dirt that can otherwise contribute to the degradation of the headphone pads. Conclusion It saves battery on both devices because they’re not always looking for other devices to pair with. The best way to have perfectly fitting headphone pads is to buy the same pads that the manufacturers use for your specific headset model. Simply look up your headphone model and search for the associated replacement ear pads that are compatible with it.

Just like putting on easily removable headphone pads, simply insert the end of each hairband to the plastic lip or groove of your headphones.

🍪 Privacy & Transparency

On your device, go to Settings >Bluetooth and enable Bluetooth. Activate discovery mode on your accessory and watch for it to show up on your device. Once it appears on the screen, tap the accessory’s name to pair. Press and hold power button for about 10 seconds and then you'll hear Bluetooth device list is cleared. Turn Bluetooth on and off again. A soft reset of Bluetooth can occasionally fix a problem. Entering and exiting airplane mode on a phone is a simple process. Restart any additional devices by shutting off the power. Regardless of whether they’re red, blue, orange, or red, you should be able to know exactly what your headphones are trying to communicate and how to solve this.

SSP is a more complex mechanism that uses elliptic curve cryptography to connect Bluetooth devices. Turn off and then turn on the headphones. For that you have to simply press and hold the Multifunction button for 3 seconds until the light flashes blue for 3 seconds. If this happens, there are many ways to fix the red and blue flashing lights. Why Do Bluetooth Headphones Have a Pairing Mode?As previously mentioned, each headphone pad material has its own unique characteristics that separate it from the rest. Don’t be surprised if your headset sounds a little bit off when you install new headphone pads made of a different material from the original. Comfort When it comes to the connectivity of Headphones the most commonly used method is either wire or Bluetooth. Although Bluetooth has improved significantly and now there are noise cancelling headphones available as well still you might face pairing or connectivity problems sometimes. The thing which most of use look for is how to reset Bluetooth headphones, earphones or headset. So, after digging deep I'm going to mention some pretty easy ways so then you will know how to do the reset for top brands such as Bose, Beats, Sony, JBL, MPOW, Skullcandy, TaoTronics, LG, Bluedio, Jabra, Portronics and JVC. But lets look in to what is the reason which could lead to such connectivity issues and how can it be avoided easily. General Headphones Resetting Then press and hold the power button for up to 5 seconds you'll notice LED flashing blue slowly then tap twice to enter pairing mode, you'll notice blue and red lights flashing alternatively.