The biggest advantage of a steam iron is that it removes wrinkles easier due to the use of steam. A regular iron on the contrary is much lighter and often cheaper. Further to this, jolts can also cause water droplets to drop out of the soleplate, so no hard and sharp movements.

The soleplate can get clogged with limescale resulting in runny water and burnt limescale substance running out of the holes while ironing clothes. Here you have the Comfigrip steam iron from Morphy Richards and turbo-supported features for an incredible completion. Handle bigger piles of clothing with our biggest water tank, and with the 400 ml water tank, there is more drawn out between refills, so you do not need to break your stream.These issues aren’t uncommon and these problems can usually be sorted out. But, you probably need to get some professional advice before you try to fix these issues though. Listed below are some common Morphy Richards steam iron problems and how to fix them: 1. The Steam Iron Leaking Clear or Dirty Water This heating device is responsible for heating the water and producing heat. If this happens, the steam iron will cause water to leak.

If you do have this setting you need to follow the steps outlined in your user manual, so that you use this feature correctly. Your steam vents might be clogged. You need to descale the iron. You can either buy descaler solutions or make your own. The simplest and most cost effective way is to mix distilled vinegar and distilled water 50/50 in a cup and use it as a solution. Pour the solution in the iron. Look at the bottom of the iron where the vents are and use a toothbrush or a bamboo skewer to clean the holes. Repeated uses over time may cause the heating device to clog up with limescale causing the iron to overheat. Morphy Richards is a UK-based kitchen and home appliance manufacturer that has revolutionized home appliances for 85 years. They are home to high-quality and reliable products for affordable prices.If you want your steam iron to work, you need to fill the water tank with water first. Again, this is a very straightforward cause, but one that is rarely considered.

This very simple cause is usually overlooked by a lot of people, and it can be the root of a lot of problems! To fix this issue, set the temperature correctly at the right temperature. There are models of steam iron that have the ‘anti-droplet’ and ‘off-steam” function to avoid having droplets of water on your clothes while ironing. Keeping the water tank clean also means that any fresh water you add into the machine stays clean. So, when it comes to using the machine, you’re only ever using unsoiled water (turned into steam) on your garments. Solution 4: Don’t overdo it with the steamHome > Household appliances > Irons > Morphy Richards Irons > Morphy Richards 40754 Comfigrip Iron Manual Morphy Richards 40754 Comfigrip Iron You need to familiarise yourself with how long your particular steam iron takes to work by reading your user manual. Solution 6: Clean the soleplate I know this sounds very basic, but not removing plastic pieces, and sellotape, can actually impact how the machine works. Plus, you should always remove any coverings before you use a new appliance for safety reasons. Cause 2: No water in the water chamber