Key specs – Upstream connection: 1x USB-C; USB ports: 3x Thunderbolt 4 USB-C 3x USB-A 3.2 Gen 2; Other ports: Gigabit Ethernet, SD Card, 3.5mm audio; Power:135W power adapter; Maximum power load: 90W per port; Dimensions: 190 x 75 x 27mm; Weight: 338g; Warranty: 12 months

You can also get other versions of Inatek's USB hub, the HB2025 for example, that connect to your computer via USB-C, which is a more common interface for 10 Gbps connections, particularly on laptops. We really wish one of these hubs had a mix of USB-C and USB Type-A downstream ports, but they are all Type-A downstream. Some USB-C hubs go further by incorporating USB-PD passthrough. Here the idea isn’t so much to power the connected devices as to power the laptop the hub connects to, so that you just connect the laptop to the hub, and it charges as you use it without the charger taking up the spare USB-C port. The key thing here is how much power the hub can supply. Most will deliver 80W or more when used with a 100W charger, which should more than cover any laptop. However, with some you’re looking at 50W or less, which might mean missing out on fast-charging modes on some of those laptops that support them. Power pass-through: All the hubs we considered also have a USB-C port that allows you to plug in your charger without taking up a second port on the computer itself (if it even has a second port). USB-C supports power at up to 100 watts, while laptops take anywhere from 30 watts (for a small machine such as the MacBook Air) to 45 watts (for many midrange laptops, as Chromebooks tend to be) to 97 watts (for the 16-inch MacBook Pro). We’ve found the Power tab in macOS’s System Report to accurately report the wattage of the power source, and in our tests we compared the figures stated there against what each company advertised. pixelpusher220 said:At least for me this was helpful. Basically all that's important is the Gen 1/2 for the Type A, and only Gen2x2 for the zippy zippy.

Still, for Windows laptops, MacBook, and Chromebook users who only need a couple of reliable ports, this makes it onto our list of best USB-C hubs. We also did power testing on every powered USB hub. To see just how much electricity the ports could deliver, we connected a MakerHawk Electronic Load Tester to the hub and tried to dial up as many amps as we could. As we dial up amps on any device, the voltage drops, so a 5 volt USB port could drop down to 4 volts or less as we increase the load, but USB devices need close to 5 volts – 4.7 or 4.8 volts is usually enough – so we tested how many amps we could get at 4.8 volts and at the, likely unacceptable, rate of 4.05 volts. If you have a recent-gen iPad with a USB-C connector, you may find yourself wishing you could connect a USB Type-A device, headphones or even an external display. Anker’s 541 USB-C Hub for iPads has you covered with a unique design that’s meant to snap right into the side of your tablet or even a USB-C laptop. There’s no wire as the USB-C plug and a slight, protruding chin hold the entire metal hub in place.

We also connected an Android phone to the ports and recorded how many volts and amps it received. The phone charging test was probably the most realistic as it showed what kind of volts and amps a real device would negotiate with the hub. Essentially, it's a tiny, super-fast connector that many of the best laptops today have a connector for, with the only downside being that USB A or USB B connectors can't be used with a USB Type-C port (that's where a USB Type-C hub comes in handy). Asides from these great features, it also has multiple OS support for use with a wide range of devices including Mac OS, Linux, Windows 11 / 10 / 8.1 / 8 / 7 / XP, and many more! And with a 2 in 4 out feature, a small size, and mounting support for easy installation, this industrial USB hub has everything you need for a multiple-device project!This industrial-grade USB hub can extend your device's single USB port to four USB 3.2 ports and allows you to switch the USB devices between two host computers (e.g. Laptop and Raspberry Pi). Anyone who works with microcontrollers such as the Raspberry Pi Pico or any Arduino board knows that most of these devices don't have on / off switches or even reset buttons. So, if you change code and need to restart them or you just want to power them off, you often need to yank the plug in and out, a huge hassle that could damage your gear. But with the Sabrent HB-B7C3, you can just toggle power on whatever port your microcontroller is plugged into. I have been using the Sabrent HB-BUP7, the nearly-identical 7-port sibling to the HB-B7C3, as my daily driver for more than a year, and having these buttons is a real game changer. Changing default audio devices in Windows is a royal pain, requiring one to go into the control panel to, for example, make sound come out of your headset instead of your speakers. But with the power switches, I just turn off my USB speaker and turn on the wireless headphone dongle, or vice versa. Technically speaking, neither USB 3.2 nor USB 3.1 by itself can deliver video. Using DisplayLink technology, one can convert and compress video into USB data that goes out to a specially-enabled hub or portable monitor. However, few people today use DisplayLink devices. USB Type-C has plenty of perks, and with one of the USB Type-C hubs you might be considering getting, you'll be able to copy files at USB 3.1 speeds, deliver enough power to charge a laptop, or use Alt Mode to send other types of data using DisplayPort or Thunderbolt 3connections.

Defines multi-lane operation for new USB 3.2 hosts and devices, allowing for up to two lanes of 10Gbps operation to realize a 20Gbps data transfer rate, without sacrificing cable length Industrial grade HUB chip, adopting MTT technology, allows stable and smooth 4x concurrent USB connections This UGreen unit is another basic USB hub, with four USB 3.0/3.1 Gen 1 ports connecting through a single USB-A connection. Disappointingly, what looks like an aluminium casing turns out to be plastic, which feels a little creaky in comparison to some models, but it’s robust enough for daily desktop or mobile use. The big advantage this one has over similarly priced rivals is a 5V micro-USB input, meaning it can charge devices while in use (without any fast charge support) and run one or more USB SSDs or HDDs – we tried it with one of each without any issues. The only downside? You’ll need to supply your own charger and cable, but it’s hard to grumble at this price. At 4.8 volts, which is around the minimum voltage most USB devices will tolerate, we got 1.25 and 1.32 amps from the charging and data ports, respectively. When I plugged my Android phone in to charge, a real-world situation because a device will negotiate the best combination of volts and amps, the charging ports sent 4.78 volts at 1.35 amps while the data ports gave the same amount of volts, but just 0.35 amps. To make a long story short, you'll get 6.4 watts from the charging ports, which is decent but not the 15-watts that fast phone chargers provide. All three charging ports should be able to deliver this at once.Unlike cheaper hubs, it supports a full 60Hz refresh rate over HDMI, while there’s a Gigabit Ethernet RJ-45 port for when you need a physical network connection. The Type-C and Type-A connections could be faster, with our SSD speeds limited to around 458MB/sec, but this is a great, fully featured hub that’s still affordable and – most importantly – it just works. Ethernet: A wired Ethernet connection is almost always faster than Wi-Fi and is more reliable, too. Most hubs with Ethernet ports support gigabit speeds, meaning data can transfer at up to 1,000 megabits a second. For each model in the test group, we verified the connection speed in Network Utility on a Mac, which displays the maximum link speed. (Note that unless you have reliable Gigabit Ethernet service, you won’t be able to measure if the port is actually performing at full speed.)

USB continues to be the answer to connectivity and charging for PCs, Consumer Electronics, Display and Mobile architectures. It is a fast, bidirectional, low-cost, dynamically attachable interface that is consistent with the requirements of the PC platforms of today and tomorrow.There are still a couple of caveats here. First, your device needs to support a DisplayPort 1.4 video output over USB-C, which will count out many Chromebooks and some MacBooks and Windows laptops. Second, the hub itself takes 15W of power, which means that – even with a 100W USB-PD charger – you may find some laptops not charging at their highest speeds. But if you’re happy to live with these compromises, this is one of the best USB-C hubs we’ve seen.