We’d always recommend that you test spray a small area first. Then when you’re happy, with the can held around 25-30cm from the surface, apply the spray in a smooth, even manner. Leave 20-30 mins between applying thin, even coats. Using car paint is an easy way to protect and revive your vehicle. Modern automobile paints are available in a few different types to suit different needs. They vary greatly in their complexity, texture, formula, and price range. For this review, we have selected the best enamel and acrylic finishes. The Simoniz Paint and Maintenance range includes undercoats, lacquers and specialist products such as Very High Temperature paints, so that you can create the finish you need on your car or other metal surface. You can read about them here to help you make the best decision. If you are using liquid engine enamel paint rather than a spray, apply it with a foam brush or small roller. It won’t leave marks like an ordinary paintbrush can. FAQ

gotcha. i wasnt sure if you had just one panel, to match the rest of the bike or done the whole bike. A. No, but it will make painting easier and will reduce the chances of you contaminating sensitive electronics. If you leave it in the engine bay, then no matter how much you strip it down there will be areas that are difficult to clean and spray properly. It really depends if you’re painting your engine for general appearance, or for show purposes. If it’s the latter, you really need to take the engine out to paint the engine properly. Whether you’re searching for car touch-up paint for scratches or scuffs or need durable spray paint to protect your metal gate and railings at home – Simoniz One Coat Tough Paints have got you covered. Clean the engine thoroughly using a degreaser — water-based versions are the most environmentally friendly. Remove flaking paint with a fine wire brush. Rinse thoroughly with water. No matter what the issue or imperfection — be it a scratch, scrape or area of intense heat — our paint and maintenance products are specially developed to restore your car to its showroom best with minimal effort. Simple and easy to use, Simoniz paints are suitable for both motoring enthusiasts keen to perform a DIY driveway repair, and professional mechanics looking for the very best professional finish.

Key considerations

No matter what the paint job, we’re guaranteed to have a product that’s right for your requirements. The Simoniz paint and maintenance range includes lab-tested VHT (Very High Temperature) Paint that’s proven to perform in extreme temperatures in excess of 800°C — making it perfect for areas of your car that are subject to intense heat, as well as stoves, barbecues and boilers. Despite the high level of compression, the spraying is quite straightforward. You should shake the can up for a solid 5 minutes to ensure all the contents have mixed to the maximum, and then spray the paint on the surface. It's worth pointing out that the preparation is the key when it comes to painting. So, we would recommend you to thoroughly degrease the surface and remove all the dust, rust, and remaining paint before spraying. Also, m ake sure to apply the paint in thin coats from end to end, holding the can at approximately 20cm. A llow 15-20 minutes of drying time and then do the next line, slightly overlapping. After you apply the final coat, leave the paint to fully cure and harden for 24 hours. The Hycote UK03015 Grey Primer is another great product that is defined as multipurpose paint by many users, even though it's created by the brand specialising in automotive supplies. It can be used for different DIY projects, small repairs, 3D printing, and other similar jobs. That's largely achieved owing to its adhesion properties and easy way of application. Unlike traditional brush rolls, it easily gets into all the nooks and crannies owing to the aerosol-style bottle with a thin nozzle. The paint goes down really well and gives a professional finish to any surface that it's been applied to. When dry, lightly sand painted areas using 320- or 600-grit sandpaper to remove the existing surface and provide a key for the new paint. Rinse again to remove dust. For those searching for a specific type of paint or maintenance product for their car, you’ve come to the right place. Developed to an impressively high standard, our paint products deliver reliable performance and complete usability — helping you to fix, protect and preserve your car’s paintwork without a costly professional repair.

A. It depends on the product. Some recommend a primer, some say they can be used without. We can’t over-stress how important it is to read and follow instructions carefully. The Hycote brand has been on the market since 1982. At first, the company created professional products for use specifically in the car racing industry, but after a while, it extended the range to a full paint and maintenance one. Today, the company meets the highest demands of modern refinish industry by providing high-quality automotive paint, paint care, and maintenance products for almost all brands of cars. What we have here is the gloss white spraypaint that ensures excellent covering power and durability. While our paint and maintenance products were developed with cars in mind, their consistency and performance means they’re great for use around the home, garden or workshop, too. From re-spraying your barbeque to revamping your trusty bike, Simoniz paint products deliver great results across a broad range of DIY applications. Paintwork on surfaces that are exposed to heat or abrasion can become chipped or flaky unless you use a paint which is highly durable. Simoniz Tough Paints are specially developed for these areas, as they’re able to withstand heat and provide a tough, chip-resistant finish.While you don’t need a primer to apply our One Coat sprays, we would recommend cleaning and lightly sanding any previously painted surface you plan to paint before you start. This will ensure maximum paint adhesion and help you achieve a solid, chip-resistant coating on a range of hard materials. When it comes to protection properties, the paint is able to withstand extreme heat (up to 150 degrees Celcius) and provide a tough chip-resistant finish. It applies smoothly and provides a durable finish that deftly resists oil, solvent, grease, and additives. Best of all, it doesn't require surface pretreatment with a primer. Just shake the tube vigorously and apply the paint from a distance of about 25cm. An easy application is ensured by a high-capacity 500ml aerosol container. A full engine strip and removal is recommended. Otherwise, remove as many components from the engine as you feel comfortable doing. Like all of our vehicle maintenance products, the Simoniz paint and maintenance range is developed to an exceedingly high standard, so you can trust us to restore and protect your car no matter what the issue or imperfection.

Anything left on the engine needs to be wrapped in plastic and secured with tape. Great care is needed if you’ve left electronics attached.In general, the paint applies to surfaces very well and in most cases, only one coat is needed, but depending on how rusty the surface is, you may want to add a second one. The drying time is around 2 hours. At this stage, if any heavy brush strokers were left on the surface they will get erased and the finish will become smooth and glossy with a flawless sheen. Another highlight of the paint is that it perfectly insulates the surface from rain and humidity and as a result can protect your vehicle from corrosion for a long time.