The blade is the lower part of the shank. It is also known as a tip. This part is hardened and tempered. Frauenfelder, Mark (2011-01-20). "Apple's diabolical plan to screw your iPhone". Boing Boing. Archived from the original on 2011-01-23 . Retrieved 2011-01-23. The pentalobe screw drive is a five-pointed tamper-resistant system implemented by Apple in its products. [43] Apple's first use of the pentalobe drive was in mid-2009 to secure the battery in the MacBook Pro. Smaller versions are now used on the iPhone 4 and subsequent models, the MacBook Air (since the late 2010 model), the MacBook Pro with Retina Display and the 2015 MacBook. Pentalobe screw sizes include TS1 (also known as P2 or 0.8mm, used on the iPhone 4 and subsequent models), TS4 (also known as P5 or 1.2mm, used on the MacBook Air [since late 2010], the MacBook Pro with Retina Display and the 2015 MacBook) and TS5 (also known as P6 or 1.5mm, used on the 2009 MacBook Pro battery). The TS designation is ambiguous as it is also used for a Torq-set screw drive. Similar to flathead screwdrivers, there are a wide range of sizes and lengths for Phillips screwdrivers and they also come in both manually driven and electric options. While Phillips screwdrivers do provide better control and driving power, the tip can still slip out of the screw head if it is driven with too much force. Go slow to ensure that the screwdriver tip grips the screw properly to avoid stripping the screw head.

Tri-point Y000 Screwdriver (for Apple Watch and iPhone 7)". iFixit. Archived from the original on 16 October 2021 . Retrieved 28 February 2017. Due to the difficulty of turning these fasteners without specialized (and uncommon) five-point wrenches such as hydrant wrenches, they are commonly used for tamper resistance by public utilities on water meter covers, natural gas valves, electrical cabinets, and fire hydrants. Transactions of Technical Conference on Metric Mechanical Fasteners. American National Standards Institute. 1975. p.67. Archived from the original on 2021-04-15 . Retrieved 2020-10-26. The following are screw drives based on a cruciform shape; i.e., a cross shape. Other names for these types of drives are cross recessed, cross-head, cross tip, and cross-point. A double slotted screw drive is not considered cruciform because the shape is not recessed, and consists only of two superimposed simple milled slots. Some of these types are specified in ISO 4757, Cross recesses for screws.Spline drives were specified for 5, 6.3, 8, 10, 12, 14, 16, and 20mm size screws. [82] Its primary advantage is its ability to resist cam out, so it is used in high-torque applications, such as tamper-proof lug nuts, cylinder head bolts, and other engine bolts. Phillips screwdrivers have an X-shaped tip that is made to fit inside the X-shaped notch of a compatible Phillips head screw. These tools were developed in the 19th century as an improvement over flathead screwdrivers because the shape of the screwdriver head provides better traction or grip when you are driving or removing screws. The 12-spline flange screw drive has twelve splines in the fastener and tool. It consists of 12 equally spaced protrusions, each with a 60° angle. It is achieved overlaying 4 equilateral triangles, each one rotated 30° over the previous one. The spline drive was part of the obsolete, U.S-designed Optimum Metric Fastener System and was defined by ASTM B18.2.7.1M, which was withdrawn in 2011, [81] making the spline drive obsolescent. When a Phillips Is Not a Phillips Plus So Much More!". Instructables. Archived from the original on 2021-06-08 . Retrieved 2021-09-23. Phillips, JIS, Pozidriv, SupaDriv and other screw drive types". blog.jtbworld.com. Archived from the original on 2014-07-01 . Retrieved 2017-09-02.

Ryder Windham (2006). You Know You're in Rhode Island When...: 101 Quintessential Places, People, Events, Customs, Lingo, and Eats of the Ocean State. Globe Pequot Press. pp.60ff. ISBN 978-0-7627-3940-0. ISO 8764-1:2004(E) Assembly tools for screws and nuts — Screwdrivers for cross-recessed head screws — Part 1: Driver tips" (PDF). Archived (PDF) from the original on 2023-04-30 . Retrieved 2023-05-01. Means for uniting a screw with a driver". US Patent and Trademark Office. US Government. Archived from the original on 5 March 2016 . Retrieved 28 February 2016.Yankee Screwdriver: Instead of using ball bearings, this screwdriver uses a spring-loaded mechanism. Instead of twisting the screw with your wrist, you place the screw head against the screw and push it to tighten. A Phillips screw head is slightly different from a PoziDriv; [10] see §Pozidriv section below for details. a b c d e f g h i Higgins, Matt (September 16, 2015). "What is the Difference: Screw Bits– Phillips vs. Pozidriv". Fine Homebuilding. 154 (November 2015): 38. Archived from the original on 2016-04-19 . Retrieved 2015-09-25.