Experience both audible and visual safety warnings with the digital screen, which will change colour to indicate different incident types for clear safety advice.

a carbon monoxide alarm should be installed where there is a flue or a carbon-fuelled appliance (such as a boiler, a fire – including open fires, and heaters) Interlinked is a term used to describe a network of alarms that communicate with each other. In an interlinked network if one device detects fire then all devices in the network will sound – this means that if a fire starts in remote parts of the home, you are alerted across all devices instantly. The advice below is purely provided for ‘best practice’ and should not be used independently. Please note, these alarms are not suitable for homes in Scotland under the new Fire & CO regulations. The alarm comes with 2 X AA batteries that can be replaced once the low battery chirp can be heard. Our FA3322X4 Carbon Monoxide Alarm with digital display comes with a sealed, tamper proof battery that will last the lifetime of the alarm. The sensors within the unit will deteriorate after 10 years, so to ensure you’re protected we recommend you replace the unit after this time.

Find out more about the FA3820X4 CO Alarm. FA3313X4: Carbon Monoxide Alarm with replaceable batteries The alarm features the latest CO sensing technology and can be used to replace end-of-life FireAngel CO-9X alarms. Fitted with a sealed, tamper proof battery that will last the lifetime of the alarm. The sensors within the unit will deteriorate after 10 years, so to ensure you’re protected we recommend you replace the unit after this time. FireAngel’s new range of carbon monoxide alarms use intelligent sensing technology for a rapid reaction to rising levels of CO. Mains powered alarms are powered by your home’s electricity supply and can be identified by a light which indicates they are connected to the mains power. Battery powered alarms do not have a green light and when removed you will have a flat base plate without any connections. For safety reasons If your alarms are mains powered or you are not sure, you should consult a qualified electrician or the manufacturer for advice. Carbon monoxide sensors have a finite lifespan of between five and seven years, although a few manufacturers now claim that their sensors will last a full ten years. Generally speaking, it’s worth playing it safe and replacing your alarm a year or two before its life is supposed to run out. Tests in the US have shown that alarms over eight years old can fail to detect CO at levels of above 400ppm.

With our sleep easy function, you can silence low battery chirps for 8 hours, up to 10 times. This feature not only allows you to enjoy a silent night’s sleep, but gives you vital time to take action and replace your batteries. There is a 'key' provided which is removed in orde r to activate the detector (i.e. connect to internally fitted battery). This can be replaced if you want to take it on your travels and reactivate at your destination which may be of interest to some. Read full review Our mains powered Smoke ( SW1) and Heat ( HW1) alarms, can be interlinked across the entire home. This interlink requires a physical hardwired connection (a physical wire to run between the devices) which may require extensive rewiring by a qualified electrician. A wireless interlinked network is established using radio frequency – which means that additional alarms can be added to a network at any time.

The FA3313X4 is the ideal replacement for end-of-life FireAngel CO-9B alarms, featuring the highest level of CO detection for your home. With intelligent CO sensing technology and built-in features including Sleep Easy function and Alarm Memory, this alarm will keep your family protected from carbon monoxide. The best carbon monoxide alarms you can buy in 2023 1. Nest Protect: Best smart CO and smoke detector For a person to begin feeling the effects of carbon monoxide poisoning, they would need to be exposed to a carbon monoxide level of 50 parts per million (ppm) for eight hours. An alarm’s response time will vary depending on the level of carbon monoxide in the air. For example, an alarm will sound after three and a half hours of continuous exposure at a level of 50ppm, yet will sound after eight minutes of continuous exposure at a level of 400ppm.” With low level CO monitoring, a pre-alarm warning to open windows helps reduce the risk of CO poisoning and prevents build-up of dangerous CO levels. If a room is not ventilated and ppm levels continue to increase, the alarm will activate. x carbon monoxide alarm (to be installed as per the fitting instructions in the room where the boiler is installed)

First introduced in January 2019 the new legislation will ensure that every home in Scotland will have the same level of Fire and Carbon Monoxide protection regardless of whether they own or rent their home. After the regulations came into force in February 2022 after the Scottish Government announced a delay to support during the COVID-19 pandemic, following the below guidance will ensure your home is protected and compliant with the law. What does the new tolerable standard mean for each home? Find out more about what you should expect from your landlord for CO safety in your home. Get protected todayCarbon monoxide alarms do not have to be interlinked into the network under the guidelines of the new standard, however doing so will ensure an alert to carbon monoxide is heard across the whole network too. View FireAngel alarms that comply with the new law. Under the extended Smoke and Carbon Monoxide Alarm (England) Regulations 2015, from October 1st 2022, a carbon monoxide alarm will be required in all rooms where there is a fixed combustion appliance – such as gas boilers or gas fires – once the compliance date is announced. However, gas cookers are excluded from the updated regulation. The FA6813-EU offers electrochemical sensing technology and a clear loud alarm to ensure trusted carbon monoxide (CO) detection for your home. This alarm also features our new Crescendo Test, which helps to protect your hearing by allowing you to choose the volume level of the test alarm. Simply hold down the test button and the alarm will move through the increasing volume levels (similar to a rising ‘crescendo’) until you find the alert sound level you are comfortable with. If you install the FireAngel Pro Connected range in your home, you can add the Smart Gateway which will allow you to test the alarms and receive instant alerts via your phone or smart device.