The J-roller should be used after every plank is installed and again after the entire installation is complete.

Applying pressure to laminates and adhesive edging is essential so make sure you have it down tight by using this J-roller.

I put slats on the substrate and put the formica on the slats, position it and start pulling slats out and pushing it down. Credit subject to status, UK residents only, Axminster Tool Centre Ltd trading as Axminster Tools acts as a broker and offers finance from a restricted range of finance providers, PayPal Credit is a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH.

Achieving stunning walls inside your living space with Wallplanks peel-and-stick panels is easy to do yourself. As a roller ‘rolls’ over the surface compared to the rubbing action of a felt block, the chance of scratching the surface is significantly reduced. That's why Wallplanks encourages you to use our J-Roller, which enables the installer to apply even pressure to the panels for maximum VacuuBond™ adhesion. Oh and by the way - when I do some of the projects you want dome that require Formica I will need it again.About the only place I've ever had to use two coats is on the edges where the first coat tends to get soaked up a bit. J-Rollers are a simple but effective tool for getting the needed leverage and perfect pressure when applying glued veneers and laminates.

When I did my first laminate on the multifunction table tops, I couldn't find a J roller at eh Borgs, so I took a piece of 2 X 4 and used some spray contact cement I had to attach a piece of felt to it. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. I even expected it to have been unwrapped or box cut open but it was obviously brand new and in perfect condition. Woodworking is your worldwide home for discussion of all things woodworking, carpentry, fine furniture, power tools, hand tools, and just about anything else about making - anything - from trees!

We will introduce you exclusively to Omni Capital Retail Finance Limited finance products provided by Omni Capital Retail Finance Limited through the Deko platform. If you canceled a pickup item, and you were billed for it, we initiate your refund immediately after you submit your cancelation request. The Rubber sleeve is not glued on the bearing roller so you can slide it over 'off centre ' to recess the metal shaft. I've done many work table tops this way that are still in service today with no signs of air bubbles or laminate separation. When you apply firm pressure across each board it activates the incredibly strong adhesive within the tape and guarantees that the boards will remain securely bonded to your wall.