Chlorine is the most significant element of a spa chemical starter kit. It is usually used in households as bleach. Along with Bromine, consider it as the most effective sanitiser for your hot tub. Apply Chlorine to your hot tub to kill bacteria and keep the water safe and clean.

pH minus is used to decrease the pH level of the water. The pH minus is an effective way to keep your hot tub’s pH levels lower, reducing the alkalinity and producing a more relaxing bathing experience. It’s the best way to avoid itchy skin or stingy eyes. pH Plus is another component of the Lay-Z-spa chemical starter kit. If your hot tub’s pH level is low, it means your hot tub is getting acidic.Do not get me wrong; overexposure to Chlorinated water is not healthy. It is just that some people do not feel bad about the Chlorine smell in their hot tub water. There is no single best way to find the perfect product for you be it a PH increaser or either Chlorine or Bromine. It is a time taking process and ultimately happens over time. This pool chemical starter kit is the safest means of sanitising your hot tub without worrying about putting the excess in your pool. There are two ways you can put chlorine in the hot tub:

Each treatment available on the market is different; From Bromine or Chlorine tablets and granules to chemicals for salt systems. Most of them work as advertised to kill bacteria, but unless we have used them, we cannot say if they are the best choice for a hot tub owner. One thing for sure is you shouldn’t use a hot tub without chemicals Consider using clearwater hot tub chemical starter kits to increase the pH level. In that case, using pH plus comes in handy. Add two teaspoons per 1000 gallon water. Use a jug to dissolve warm water and distribute evenly throughout the tub water. Leave for a minimum of 2 hours and then retest the water to ensure that the pH level is between 7.2-7.6. Add more if needed. This is an ideal set of hot tub chemicals for beginners as it comes with a user guide with simple, easy-to-follow instructions, dosing guidance, safety tips and problem-solving so you can get confidently get started with hot tub water treatment and maintenance.You might be wondering what chemicals you need for a Lay-Z-Spa. In reality, there are only 2 or 3 essential chemicals needed for a hot tub. These are explained below. Any others will be to help with clarity and cleaning. Do I Need To Put Chemicals In My Lay-Z-Spa? So, disinfect your hot tub with chlorine first and then control the pH level with pH minus or pH plus and test the pH levels with a test strip. First, test the pH and alkalinity level of the water. If one of these levels are imbalanced, you need to use the foam remover. Shake the bottle before using the foam remover. Make sure that the water temperature is 20-degrees. Add two teaspoons of chlorine per 200 gallons of water. Let the chlorine dissolve in the water.